6000 2rs bearing deep groove ball bearing 6000 zz bearing

Deep groove ball bearing 6000 2rs bearing 1.Low noise and low libration, heat resistant 2.Type:OPEN,Z,ZZ,RZ,2RZ,RS,2RS

Deep groove ball bearing 6002 bearing ball bearing

Deep Groove Ball Bearing is the most representative rolling bearing,it can suffer from both axial and bidirectional ratial load.It can be used in these occasions with the demand of high rotation,low noise,and low oscillation.Bearing with seal together with steel cover of rubber seal usually filled with lubricant in advance ,the outside ring with stopping circle or flange,these will not only be easier for axial orientation ,but also good for the installing of outside shell.The size of maximum loading bearing is just the same as standard bearing ,while with backfill trough in the inside and outside ,which can add the balls,and improve the maximum load at the same time.

  

Model Specifications

BEARING	Bore	Quter Diameter	Width	Radius	Basic Load Rating(KN)		Steel Ball		Max Speed (rpm)
TYPE	d	D	B	r	Dynamic	Static	Quantity	Size	Grease	Oil
NO.	mm in	mm in	mm in	mm	Cr	Cor	NO.	mm	r/min	r/min
6000	10 .3937	26 1.0236	8 .3150	0.3	3.52	1.95	7	4.763	22000	30000
6001	12 .4724	28 1.1024	8 .3150	0.3	3.93	2.23	8	4.763	19000	26000
6002	15 .5906	32 1.2598	9 .3543	0.3	4.3	2.51	9	4.763	18000	24000
6003	17 .6693	35 1.3780	10 .3937	0.3	4.62	2.79	10	4.763	17000	22000
6004	20 .7874	42 1.6535	12 .4724	0.6	7.22	4.46	9	6.35	15000	19000
6005	25 .9843	47 1.8504	12 .4724	0.6	7.74	4.96	10	6.35	14000	18000
6006	30 1.1811	55 2.1654	13 .5118	1	10.18	6.91	11	7.143	12000	15000
6007	35 1.3779	62 2.4409	14 .5512	1	12.47	8.66	11	7.938	10000	13000
6008	40 1.5748	68 2.6772	15.5906	1	13.1	9.45	12	7.938	8000	11000
6009	45 1.7717	75 2.9528	16.6299	1	16.22	11.96	12	8.731	7200	9000
6010	50 1.9685	80 3.1496	16.6299	1	19.64	12.95	13	8.731	6400	7800

Products Show

Factory show

 R&D Dept Show

Package Show

6000 2rs bearing deep groove ball bearing 6000 zz bearing